How to Transfer Files with SFTP

SSH File Transfer Protocol (SFTP) provides a mechanism for transferring, accessing, and managing files more securely compared to earlier protocols. It is a free and open-source utility that is available on all Linux systems. SFTP extends version 2.0 of the Secure Shell (SSH) protocol to provide greater security. This guide provides some background information about SFTP and explains how to use it to transfer files.

What is SFTP

SFTP, sometimes referred to as the Secure File Transfer Protocol, was developed to address serious security concerns surrounding the original FTP protocol. Despite its acronym, it is based on the SSH program and not on the original FTP utility. SFTP is designed from scratch to provide comprehensive file management. This architecture allows SFTP to leverage and access SSH security and authentication features. One advantage of SSH is that all data is encrypted, including the control commands.

SFTP is a file management protocol rather than a pure file transfer utility. It also provides the ability to delete, rename, and move files, and create, list, and delete directories. SFTP requires the use of a secure channel, which it uses to carry out all operations. A number of protocols can provide this channel, but in practice, SSH is almost always used. When the secure channel has authenticated the client, SFTP can be used.

An enhancement over earlier protocols is that files are uploaded along with their basic attributes, such as timestamps. SFTP shares its default port 22 with SSH. This single-port architecture means it is easier to use and secure than other similar protocols. SFTP allows pipelined requests and asynchronous responses and uses binary communications. This is advantageous for security, but makes it difficult to log. Unfortunately, there are occasional compatibility issues between implementations from different vendors.

SFTP should not be confused with the original Simple File Transfer Protocol, which was also abbreviated as SFTP. This older protocol was never widely used and has fallen out of favor.

How Does SFTP Differ From FTPS and SCP

The Secure Copy Protocol (SCP) utility is commonly used for file transfers. However, it lacks the functionality of SFTP. Here is a comparison between the two protocols:

SFTP provides a wider set of capabilities, including file and directory management commands, while SCP is only used for file transfers. SCP is generally preferred for quickly transferring a single file, while SFTP is better for more complex file management.
SFTP is considered more system independent than SCP.
SCP is faster than SFTP, especially over high-latency connections, because it uses a more efficient algorithm. SFTP also spends more time acknowledging packets.
Both services are widely available on Linux systems, although SCP is more commonly used.
Both protocols use SSH capabilities, and both are considered quite secure. They both protect data from being intercepted.
SFTP can resume file transfers that have been paused. SCP does not do this.
SCP is completely non-interactive, but SFTP provides an interactive option. Third-party GUIs are available for SFTP, but not for SCP.

File Transfer Protocol Secure (FTPS) extends the FTP protocol to integrate Transport Layer Security (TLS) security services. By comparison, SFTP is based on the SSH protocol. So FTPS is not related to SFTP, nor is it compatible with it. The two protocols differ in the following ways:

While SFTP uses a single port (22) for all requests, FTPS uses multiple ports. This makes FTPS more difficult to use and secure.
SFTP uses the authentication methods from SSH. To use FTPS, an SSL certificate is also required. SFTP is considered easier to implement.
FTPS is somewhat faster because the control and data channels run on two different connections. However, the performance difference is not as significant as the one between SFTP and SCP.
FTPS services are somewhat more limited or restricted compared to SFTP. Certain file operations are not standardized or secured in FTPS.
FTPS requires additional commercial or free software packages to be installed, whereas SFTP is installed as part of the SSH package.
SFTP can use key-based authentication, but FTPS cannot.
FTPS must be used on devices that lack SSH capabilities, such as cell phones.
FTPS uses ASCII mode, which can corrupt binary files if the mode is not set correctly.
FTPS can log file transfer activities in a human-readable format.

In summary, SFTP is a good, all-purpose utility with more functionality than the alternatives. It is the best choice for most remote file management scenarios. Due to its performance advantage, SCP is a better choice to transfer one or two large files. FTPS must be used if the source device does not support SSH or human-readable logging is required. All three protocols provide a good level of security for basic file transfers.

Before You Begin

If you have not already done so, create a Linode account and Compute Instance. See our Getting Started with Linode and Creating a Compute Instance guides.
Follow our Setting Up and Securing a Compute Instance guide to update your system. You may also wish to set the timezone, configure your hostname, create a limited user account, and harden SSH access.

Note

The steps in this guide are written for non-root users. Commands that require elevated privileges are prefixed with sudo. If you’re not familiar with the sudo command, see the Linux Users and Groups guide.

Create an SFTP Connection

Linux implements the SFTP protocol using the SFTP utility. Other SFTP clients are also available, but this guide only covers SFTP. This utility is installed as part of the SSH package.

Before performing any file operations, first, use SFTP to establish a connection to the remote computer. To connect successfully, you must have the appropriate privileges to access the remote system. While logged in to the local system, follow the steps below to establish a connection:

Enter the sftp command along with the username of the target account and the IP address of the remote system. Separate the username and address using a @ symbol.
```
 sftp username@remote_system_address
```
Note
If SFTP is not using the standard port 22, specify the port number using the -P option, for example, sftp -P port_number username@remote_system_address.
When prompted, provide the password associated with the specified user account.
```
username@remote_system_address's password
    
```
Upon successful authentication, SFTP confirms the connection is now active and displays the sftp> prompt.
```
Connected to remote_system_address.
sftp>
    
```

If you cannot connect to the remote server using SFTP, ensure the SSH server is running on the destination server. To verify the status of the SSH server, use the following command:

 sudo systemctl status ssh

ssh.service - OpenBSD Secure Shell server
     Loaded: loaded (/lib/systemd/system/ssh.service; enabled; vendor preset: enabled)
     Active: active (running) since Tue 2021-08-31 12:13:14 UTC; 46min ago

Note

Virtually all Linux distributions include SSH and SFTP as part of the default package. However, if the sftp command is not available, install the ssh package using apt or another package manager.

Open the SFTP Port

In some cases, the UFW firewall might not be configured to allow SFTP requests. To allow SFTP configurations, enable the ssh component.

Verify the current ufw settings to see whether ssh is allowed. If SFTP requests are allowed, port 22 is shown with an action of ALLOW. In this example, SFTP is not yet enabled.

 sudo ufw status

OpenSSH                    ALLOW       Anywhere
Apache Full                ALLOW       Anywhere
80/tcp                     ALLOW       Anywhere
OpenSSH (v6)               ALLOW       Anywhere (v6)
Apache Full (v6)           ALLOW       Anywhere (v6)
80/tcp (v6)                ALLOW       Anywhere (v6)

Enable SSH to allow SFTP requests.

 sudo ufw allow ssh

Rule added
Rule added (v6)

Verify port 22/tcp is now shown in the output using the ufw status command. If ufw is not active, enable it using the sudo ufw enable command.

 sudo ufw status

Status: active

To                         Action      From
--                         ------      ----
OpenSSH                    ALLOW       Anywhere
Apache Full                ALLOW       Anywhere
80/tcp                     ALLOW       Anywhere
22/tcp                     ALLOW       Anywhere
OpenSSH (v6)               ALLOW       Anywhere (v6)
Apache Full (v6)           ALLOW       Anywhere (v6)
80/tcp (v6)                ALLOW       Anywhere (v6)
22/tcp (v6)                ALLOW       Anywhere (v6)

To terminate the SFTP connection at any time, enter quit.
```
 quit
```

Navigate the Directory Structure with SFTP

By default, the remote SFTP server places users in their home directory when they first connect. To confirm the working remote directory, use the pwd command.
```
 pwd
```
```
Remote working directory: /home/username
    
```
File navigation works much as it does in a normal Linux context. Use the cd command to change to a new directory. To navigate relative to another directory, follow cd with the name of the target directory. The cd .. command moves the context up one level.
```
 cd wpbackup
 cd ..
```
The cd command can also be used with an absolute pathname, as shown in the example below:
```
 cd /usr/bin
```
Return to the remote home directory at any time by entering cd without any arguments.
```
 cd
```
To list the contents of the remote working directory, use the ls command.
```
 ls
```
These commands can all be preceded with an l to execute the command locally. To change the local working directory, use the lcd command. The command lpwd displays the local working directory. lls lists the contents of the local working directory.
```
 lcd accounts
 lpwd
```
```
Local working directory: /home/username/accounts
    
```
Note
File transfers occur to/from the local working and remote working directories. It is important to confirm both settings before performing any transfers. A common source of errors is forgetting to set the local working directory correctly.

Transfer Files with SFTP

To transfer files, use the get and put commands. These commands can be used to transfer a single file or an entire directory. Additionally, SFTP allows users to resume interrupted transfers.

Set the local and remote working directories with the cd and lcd commands. When transferring a file from the remote system, it is retrieved from the remote working directory and copied to the local working directory.
```
 cd remote_source_directory
 lcd local_target_directory
```
To retrieve a single file from the remote system, enter the get command and the name of the file. SFTP updates the progress of the transfer until it completes.
```
 get states.txt
```
```
Fetching /home/username/states.txt to states.txt
/home/username/states.txt                        100%   51    50.5KB/s   00:00
    
```
To save the file with a different name, append the new name as the last argument to the get command. In this example, the file named states.txt on the remote system is saved as states2.txt in the local working directory.
```
 get states.txt states2.txt
```

If the transfer is interrupted for any reason, resume it using the reget command.

 reget states.txt

Resuming /home/username/states.txt to states.txt
/home/username/states.txt                        100%   51     0.0KB/s   00:00

To retrieve all files in a directory, use the get command with the -r option and the name of the directory.
```
 get -r php_backup
```
To upload a file to the remote server, use the put command. The following example demonstrates how to transfer a single file. Once again, SFTP uses the local and remote working directories to identify the source and target directories.
```
 put countries.txt
```
```
Uploading countries.txt to /home/username/countries.txt
countries.txt                                 100%   42    97.9KB/s   00:00
    
```

Use the -r option to upload all files in a directory. The following example transfers all files in the accounts directory to the remote working directory on the SFTP server.

 put -r accounts

Uploading accounts/ to /home/username/accounts
Entering accounts/
accounts/states2.txt                          100%   51   119.3KB/s   00:00
accounts/states.txt                           100%   51   138.2KB/s   00:00
accounts/cities.txt                           100%   29    78.7KB/s   00:00
accounts/countries.txt                        100%   42   118.3KB/s   00:00

Other Useful SFTP Commands

Because SFTP provides full file management capabilities, it can duplicate most traditional Linux file commands. Users can rename or remove files, change permissions, add directories, or display information about files.

To remove a file on the remote system, use the rm command.

 rm testconnection2.php

Removing /home/username/testconnection2.php

To remove an entire directory on the remote system, use the rmdir command. The directory must be empty before it can be removed.
```
 rmdir backup
```
The mkdir command can be used to create a new directory on the remote system. The new directory is created inside the remote working directory.
```
 mkdir backup
```
Rename a file on the remote system using the rename command.
```
 rename testconnection.php testconnection2.php
```
SFTP provides all the Linux file administration commands, such as chown, chmod, and chgrp. For example, to change file permissions, use the chmod command.
```
 chmod 644 testconnection2.php
```
```
Changing mode on /home/username/testconnection2.php
    
```

The df command provides information about disk usage on the remote system.

 df -h

    Size     Used    Avail   (root)    %Capacity
  78.2GB    7.1GB   67.2GB   71.1GB           9%

SFTP provides a mechanism to run a local command that is not available in SFTP without breaking the connection. To escape to the local shell, type !. Type exit to return to the SFTP prompt.
```
 !
 exit
```
SFTP supports wild cards for most commands. To list all text files in the remote working directory, run the following command:
```
 ls *.txt*
```

To display a full list of all the available SFTP commands, type help.

 help

Available commands:
bye                                Quit sftp
cd path                            Change remote directory to 'path'
...
!command                           Execute 'command' in local shell
!                                  Escape to local shell
?                                  Synonym for help

Use an SFTP GUI Client to Transfer Files

If you prefer to use a graphical user interface (GUI) to work with files remotely, there are several available options. FileZilla is a popular open source SFTP client that supports SFTP, FTPS, FTP, and IPv6. To learn how to install and use this tool, see our Transfer Files with FileZilla guide.

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

Compute

Storage

Databases

Networking

Developer Tools

Delivery

Security

Services

Industries

Pricing

Community

Engage With Us

Search Results

No Results

Filters

Transfer Files with SFTP

What is SFTP

How Does SFTP Differ From FTPS and SCP

Before You Begin

Create an SFTP Connection

Open the SFTP Port

Navigate the Directory Structure with SFTP

Transfer Files with SFTP

Other Useful SFTP Commands

Use an SFTP GUI Client to Transfer Files

More Information

Your Feedback Is Important

On this page